Instruction manual

CHAPTER 4. ADMINISTRATE TASKS-SYSTEM
How to Set Date and Time
The system date and time are set using the Date and Time form (see Figure 4-2). This form is
displayed on the terminal screen and is modified using the terminal keyboard. The time must be
reset for daylight savings time. The correct time and date assure that SMDR records are correct
for the records being kept. SMDR will not work until the date and time have been entered. Use
the following procedure to set the system date and time:
1. Log in.
2. Verify that the screen displays:
enter command:
3. Enter set time and press [RETURN].
4. Verify that the screen displays the Date and Time form (see Figure 4-2).
Note: The cursor is positioned on the Day of the Week: line.
set time page 1 of 1
DATE AND TIME
DATE
Day of the Week:
Month:
Day of the Month: _
Year:
TIME
Hour: _
Second: XX
Minute: _
FIGURE 4-2. Date and Tlme Screen Form
5. Enter the day of the week (Sunday-Saturday) and press [RETURN].
Note: The cursor is positioned on Month:.
6. Enter the current month (January-December) and press [RETURN].
Note: The cursor is positioned on Day of the Month:.
7. Enter the day of the month (1-31) and press [RETURN].
Note: The cursor is positioned on Year:.
4-10