Instruction manual

CHAPTER 4. ADMINISTRATIVE TASKS-SYSTEM
The following steps give an example of how to change a FAC from three to two digits.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Verify that the screen displays:
enter command:
Enter change feature-access-codes and press [RETURN].
The screen displays the FAC form.
Position the cursor over the 3-digit FAC and press the space bar until the 3-digit code
disappears.
Press [RETURN]
and repeat the above step until all 3-digit FACs have been removed.
Press [ENTER].
The screen displays:
command successfully completed,
enter command:
Enter change dialplan and press [RETURN].
Screen displays the Dial Plan Record form.
Press [RETURN]
until the cursor is positioned on the 1: Number of Digits field.
Enter
2 and press [ENTER]. The screen displays:
command successfully completed,
enter command:
Enter change feature-access-codes and press [RETURN].
The screen displays the FAC form.
Assign 2-digit FACs to the desired features. After all codes have been assigned, press
[ENTER]. The screen displays:
command successfully completed,
enter command:
4-9