Instruction manual
CHAPTER 4. ADMINISTRATIVE TASKS-SYSTEM
How to Change a Netcon Channel
Netcon channels can be changed by entering the command
change data module 4444
and
pressing [RETURN]. Extension number 4444 is the extension number assigned to the data or Net-
con channel.
Once the form is displayed on the screen, the user can make changes. Once all changes have
been made, press [ENTER] to submit the changes into system translations.
How to List Netcon Channels
The list data-module command can be used to display a list of all Netcon channels that have
been assigned in the system. The display gives a list of all data modules and Netcon channels
and their associated data, which includes:
● Extension
● Port number
●
Type of module (Netcon channels are listed along with the other types of modules)
●
Name (if assigned)
●
Class of Service (COS)
●
Class of Restriction (COR)
●
Information Systems Network (ISN) (this field shows if the data module is connected to
the ISN)
The
display data-module xxxx (extension number) [print]
command can be used to obtain a
printout for one Netcon channel.
How to Administer Dial Plan and Feature Access Codes
The Dial Plan Record and the FACs can be administered together to insure continuity for the
number of digits assigned to FAC. The number of digits used to dial the FAC must agree with the
number of digits assigned to the
FAC
field on the Dial Plan Record. The system does not allow a
mismatch between these numbers. For example, if the Dial Plan Record has two digits assigned
for FAC, then each FAC must be assigned two digits. The user dials these digits to activate and
deactivate a feature.
The Dial Plan Record must be administered before assigning FACs, trunk access codes, and
voice terminal extensions. The Dial Plan Record can be administered as a stand-alone screen
form as long as the changes being made do not affect the FACs, Trunk Access Codes (TACs),
and voice terminal extension numbers. Once the TACs and voice terminal extension numbers
have been assigned, the user cannot change the Dial Plan Record.
Once the Dial Plan Record and FACs have been administered, the System Manager can change
the digits assigned to FACs as long as they agree with the Dial Plan Record. For example, the
System Manager can change a FAC from 12 to 13 as long as no other FAC is assigned to 13.
4-8