Instruction manual

CHAPTER 4. ADMINISTRATIVE TASKS-SYSTEM
Note: Valid passwords contain four to seven alphabetic or numeric characters, or a
combination of alpha and numeric characters.
8. Cursor is positioned on
New
Password (enter again):
9. Re-enter your new password.
10. Press [ENTER].
11. Verify that the screen displays:
command completed successfully
enter command:
change password xxxxxxxx
Page 1 of 1
PASSWORD CHANGE
Change Password For Login Name: xxxxxxx
Your Current Password:
New Password For Login Name:
FIGURE 4-1. Password Change Screen Form
How to Set Up the System to Allow Remote Administration
Another way to administer the system, other than the system administration terminal, is from a
Remote Terminal. The Remote Terminal can be located either on or off the customer's premises.
All
functions of the system administration terminal are retained by the Remote Terminal; how-
ever, terminal operation speed is limited to 1200 bps (bits per second) from a dial-up facility.
Up to five terminals can be connected to the system. In any type of configuration, only one termin-
al at a time can be used for administration purposes (such as adding, changing, or deleting sys-
tem
and
voice terminal features). The other terminals may be used by Automatic Call Distribution
(ACD) supervisors to view Basic Call Management System (BCMS) information. To set up the
system to allow for Remote Administration, use the following steps:
Note: Remote Access numbers and barrier code assignments should be kept confidential
to prevent unauthorized persons from accessing the system. Toll and service
charges resulting from the unauthorized access of the system are the responsitility
of the customer. As a result, it is recommended that the Remote Access number and
associated Barrier Codes be changed periodically to maintain system security.
4-4