Instruction manual

CHAPTER 3. SYSTEM ADMINISTRATION
Groups
After the voice terminals are added, the following items can be administered using the add com-
mands:
●
●
●
●
●
●
Abbreviated Dialing (System, Group, Enhanced)
Hunt Groups
Call Coverage Answer Groups
Pickup Groups
Intercom Groups
Terminating Extension Groups
Trunk Groups
Trunk groups are assigned by entering the command add trunk group 1-99 (or next). For the
Hospitality Reduction Parameter feature, only 50 trunk groups can be assigned.
The Network Access Features forms are filled out by the Account Team and must always be
entered. The Network Access forms are provided in two sections, Private and Public. The Public
Network Access includes the Trunk Group forms which, when entered, provide voice terminals
and attendants with access to and from the public network.
Private Network Access allows calls to be connected to several networks, such as the following:
●
●
●
●
●
●
●
Common Control Switching Arrangement (CCSA)
Digital Signal Level 1 (DS1) Interface
Electronic Tandem Network (ETN)
Enhanced Private Switched Communications Service (EPSCS) Access
Tandem Tie Trunk Network (TTN)
Integrated Services Digital Network-Primary Rate Interface (ISDN-PRI)
Software Defined Data Network (SDDN)
3-4