Instruction manual

CHAPTER 3. SYSTEM ADMINISTRATION
System Parameters
System parameters allow the System Manager to assign values for system related features such
as Leave Word Calling (LWC), Hospitality Features, and Station Message Detail Recording
(SMDR).
Voice Terminals
Once the Dial Plan and FACs have been assigned, the System Manager can add the various
voice terminals. The duplicate command can be used to add the same types of voice terminals.
The extension number, location, type, and user name should be entered on the form.
Modules
Data modules can be assigned after voice terminal administration. Some data modules must be
added during voice terminal administration if the voice terminal has a data module. Other data
modules can be added separately.
Netcon Channels
Netcon Channels are used to provide switched data access
for the following:
● Station Message Detail Recording
● On-premises administration/maintenance terminal
● Remote administration/maintenance terminal
● Property Management System (PMS) Link
● Station Message Detail Recording
● PMS Log Printer
● Journal Printer
● Recorded Announcements
● System Printer
● Remote Administration/Maintenance
Terminal.
Netcon channels are assigned by entering the command add
data-module (extension number
or next) and then entering Netcon in the Type field. Up to four Netcon channels can be
assigned. The channels can be added by entering the command duplicate data-module XXX
(extension number to be duplicated).
3-3