Instruction manual

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A (continued).
Terminal Keys
For This Function
To move the cursor to the previous field on a
line
If the cursor is in the first field on a line,
then it moves to the last field of the pre-
vious line. If it is in the first field of the
first line, then it moves to the last field of
the last line.
Press Key Below:
or
[TAB]
(shift)
or
[TAB]
(shift)
To m OV e the cursor to the next Iine
If the cursor is on the last line, it moves
to the first line.
To move the cursor to the previous line
If the cursor is on the first line, it moves
to the last line.
To store the data entered on a screen form
Used to enter into system memory the
data that is displayed on a screen form.
For the 4410 or 4425, the associated
[F3] screen label (ENTER) is displayed
when the add or change command is
entered and the
associated screen form
is displayed.
715‡
or
[TAB]
(shift)
Terminal Type
513 4410 4425
or
610* 610†
or or
615 MT*
615 MT†
ROLL
ROLL
[0]
[2]
[F3]
* If a 513 emulation cartridge is used for a 610 or 615 MT, the 610 or 615 MT
or
[TAB]
(shift)
[F3]
Terminal keys will function the same as the 513 BCT keys.
† lf a 513 emulation cartridge is not used with a 610 or 615 MT, the 610 or 615 MT
Terminal keys will function the same as the 4410 keys.
‡ The 715 must be set to the “BCS” emulation mode which causes it to function
like a 615 MT Terminal equipped with a 513 emulation cartridge.
2-8