Instruction manual
CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A (continued)
Terminal Keys
Terminal Type
513
4410 4425
For This Function
or
or
610*
610†
715‡
615 MT* 615 MT†
Press Key Below:
To display help information for a field or
[Help]
[HELP]
[F5]
[F5]
command
Used to display help information on the
type of data that can be entered into the
field associated with the current cursor
position. The system delays all the
possible entries the user can input for
that field. This key can also be pressed
at the
enter command:
level to obtain
a list of all the system commands.
[HELP] can be
pressed
at other com-
mand levels to obtain a list of objects
and entries for identifiers. For the 4410
or 4425, the associated [F5] screen
label (HELP) is displayed when the user
logs into the system.
To move the cursor to the next field on a Iine
If the cursor is in the last field on a line,
or
or
or
or
then it moves to the first field on the
next line. If the cursor is in the last field
[TAB]
[TAB]
[TAB] [TAB]
on the last line, then it moves to the first or
field on the first line.
[RETURN]
* If a
513
emulation cartridge is used for a 610 or 615 MT, the 610 or 615 MT
Terminal keys will function the same as the 513 BCT keys.
† If a 513 emulation cartridge is not used with a 610 or 615 MT, the 610 or 615 MT
Terminal keys will function the same as the 4410 keys.
‡ The 715 must be set to the “BCS” emulation mode which causes it to function
like a 615 MT Terminal equipped with a 513 emulation cartridge.
2-7