Instruction manual

SYSTEM BACKUP FOR DEFINITY G3vs
Save and Restore Recorded
Announcements
Enter the save announcements command to save the recorded announcements
in the system on the system Memory Cards.
NOTE:
A 4 Mb Memory Card is required to save and restore announcements.
The system takes about 30 minutes to complete this task. Because the
administration terminal is unavailable during this time, it is recommended that
this command be used after business hours (or during slow business hours for a
24 hour business operation). During this time period, the administration terminal
cannot be used to administer the system until the transfer is complete; however,
all other administration terminals, if provided, are allowed to perform
administration procedures.
Enter the restore announcements command to restore the recorded
announcements from the Memory Card back into system memory. The system
takes about 22 minutes to complete this task. The system performs an audit
to make sure that the number of announcements on the announcement
board match the announcements administered in the switch.
The working copy of the announcements are stored on the announcement board.
You should also save announcements on 4 Mb Memory Cards.
1-5