Instruction manual

SYSTEM BACKUP FOR DEFINITY G3vs
One Memory Card is provided with the system. If a backup Memory Card has
been purchased, the following procedure can be used to make a backup copy of
the system translations and/or announcements.
1.
2.
3.
4.
5.
6.
Remove the Memory Card from the TN777B Netcon circuit pack.
Insert the backup Memory Card into the TN777B Netcon circuit pack.
Log in to the administration terminal.
Verify that the screen displays:
enter command:
Enter save translation and press [RETURN]. This command instructs
the system to take all translation information in memory and transfer it into
the Memory Card.
The screen displays:
save translation
SPE_A
SAVE TRANSLATION
Proccessor
Command Completion Status Error Code
SPE_A
Success
0
Command successfully completely
enter command:
Screen 1-3. Save Translation Screen-SPEA
7. Verify that the Success message appears in the Command Completion
Status field. If it does not, an error message will appear instead.
8. If the system is equipped with a TN750 Announcement circuit pack, the
recorded announcements can be saved using the save announcements
commands. Enter save announcements and press [RETURN].
1-3