Instruction manual

SYSTEM BACKUP FOR DEFINITY G3vs
4. Enter save translation
and press [RETURN].
This command instructs
the system to take all translation information in memory and transfer it into
the Memory Card.
5. The screen displays:
Error Code
0
save translation
SPE A
SAVE TRANSLATION
Processor
Command Completion Status
SPE_A
Success
Command successfully completely
enter command:
Screen 1-1. Save Translation Screen—SPEA
6. Verify that the Success
message appears in the Command Completion
Status field. If it does not, an error message will appear instead.
7. If the system is equipped with a TN750 Announcement circuit pack, the
recorded announcements can be saved using the save announcements
commands. Enter
save announcements and press [RETURN].
8. The screen displays:
save announcements
SAVE
Processor Command
ANNOUNCEMENTS
Completion Status
Success
Error Code
0
SPE_A
Command successfully completely
enter command:
Screen 1-2. Save Announcements Screen—SPEA
9. Verify that the Success message appears in the Command Completion
Status field. If it does not, an error message will appear instead.
1-2