Instruction manual

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A. Terminal Keys
[F1]
[F1]
[F2]
For This Function
To cancel a screen form or command
Once the key is pressed, the system
returns the user to the
enter com-
mand: (tasks request) level. Any data
entered on a screen form prior to press-
ing CANCL (Cancel) or [F1] is ignored.
For the 4410 or 4425, the associated
[F1] screen label (CANCEL) is automati-
cally assigned.
To clear and redraw a screen form
The system redraws the same screen.
For the 4410 or 4425, the associated
[F2] screen label (REFRESH) is
displayed when the add, change, or
display command is entered and the
screen form is displayed.
715‡
Cancel
Clr/
Rfrsh
To clear all data in a field
The cursor must be positioned at the
field the user wants to clear before
pressing this key. For the 4410 or 4425,
the associated [F4] screen label
(CLEAR FIELD) is displayed when the
add or change command is entered and
the screen form is displayed.
(shift)
Clear
Home
Terminal Type
513 4410 4425
or or
610*
610†
or or
615 MT*
615 MT†
Press Key Below:
CANCL
CLEAR
RFRSH
CLEAR
RFRSH
(shift)
[F2]
[F4]
* If a 513 emulation cartridge is used for a 610 or 615 MT, the 610 or 615 MT
Terminal keys will function the same as the 513 BCT keys.
[F4]
† If a 513 emulation cartridge is not used with a 610 or 615 MT, the 610 or 615 MT
Terminal keys will function the same as the 4410 keys.
‡ The 715 must be set to the “BCS” emulation mode which causes it to function
like a 615 MT Terminal equipped with a 513 emulation cartridge.
2-5