Instruction manual

SYSTEM BACKUP FOR DEFINITY G3s
The following procedure can be used to make a backup Memory Card:
1. Remove the Memory Card from the Netcon circuit pack.
2. Insert the backup Memory Card into the Netcon circuit pack.
3. Login to the administration terminal.
4. Verify that the screen displays:
enter command:
5. Enter save translation and press [RETURN]. This command instructs the system to
take all translation information in memory and transfer it into the Memory Card.
6. The screen displays:
save translation SPE A
SAVE TRANSLATION
Processor Command Completion Status
Error Code
SPE_A Success
0
Command successfully completely
enter command:
FIGURE 1-1. Save Translation—SPEA
7. Verify that the
Success message appears in the Command
Completion Status field.
If it does not, an error message will appear instead.
8. If the system is equipped with a TN750 Announcement circuit pack, the recorded
announcements can be saved using the save announcements commands. Enter save
announcements and press [RETURN].
1-2