Instruction manual

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS

Overview

The terminal used to administer a DEFINITY Communications System is identified in this docu-

ment as the system administration terminal or the terminal.

The terminal supplied with the system must be located within 50 feet of the system cabinet. The

terminal consists of a video display

and a

keyboard that

allow a

System Manager to communi-

cate with the system. After initialization, the terminal is used to reconfigure translations and to

monitor system performance. The terminal can also be used by maintenance personnel.

The system can be equipped with any of the following terminals:

●

If your

715 Multi-Task (MT) Terminal

513 BCT

610 BCT

615 MT Terminal

4410 Terminal

4425 Terminal

AT&T Personal Computer (PC) 6300 using an

software package

DEFINITY System is being used with a G3-MA,

AT&T 513, 4410, or 4425 emulation

refer to DEFINITY

Communications

System Generic

3 Management Applications—Operations, 565-229-202, for terminal operating

instructions and system management procedures. No operating instructions are given in this

document.

The operating instructions in this document cover the 715, 513, 4410, and 4425 terminal types.

The operating instructions for the 610 BCT or 615 MT terminal are the same as for the 513 BCT if

the 610 or 615 MT terminal is supplied with the 513 emulation cartridge or as for the 4410 if the

513 emulation cartridge is not supplied with the 610 BCT or 615 MT terminal. The instructions

describe how the terminal keys can be used, for example, to enter, cancel, display, and change

system translations. Instructions on how to use the function keys are also provided.

The terminal key instructions are provided in Table 2-A.

2-1