Instruction manual

Telephony
555-233-767218 Issue 4 May 2003
Ringer cutoff
Allows the user of a multi-appearance telephone to turn audible ringing signals on
and off. Visual alerting is not affected by this feature. When this feature is
enabled, only priority (three-burst) ring, redirect notification, intercom ring, and
manual signaling ring at the telephone. Internal and external calls do not ring.
Ringing — abbreviated and delayed
Allows you to manually or automatically assign one of four ring types to each call
appearance on a telephone. Whatever treatment you assign to a call appearance is
automatically assigned to each of its bridged call appearances.
Ringing options
Provides multi-appearance telephone users with different ringing patterns. This
feature primarily affects audible ringing for calls directed to telephones that are
off hook, or calls directed to idle and active CALLMASTER telephones.
Send all calls
Allows users to temporarily direct all incoming calls to coverage regardless of the
assigned call-coverage redirection criteria. Covering users can temporarily
remove their telephones from the coverage path. The feature is activated and
deactivated via a button or access code.
Special dial tone
Provides the ability to play a special dial tone whenever an analog set is not able
to receive calls. When such conditions as call forward all calls, call forward
busy/no answer, send all calls, or do not disturb are activated on a telephone set, a
special dial tone lets you know that you cannot receive any calls.