Instruction manual

Internal automatic answer
Issue 4 May 2003 213555-233-767
Internal automatic answer
Allows specific telephones to answer incoming internal calls automatically. This
feature is intended for use with telephones that have speakerphones or headsets.
You simply press an internal automatic answer feature button, and calls are
automatically answered when the telephone is idle. Internal and Distributed
Communications System (DCS) calls can be answered using automatic answer,
but only attendants can use automatic answer to answer external calls directed to
the attendant.
Last number dialed
Allows you to automatically redial the last number dialed. The system saves the
first 24-digits of the last number dialed, whether the call attempt was manually
dialed or dialed using abbreviated dialing. When you press the last number dialed
button or dial the last number dialed feature access code, the system places the
call again.
Local call timer automatic start/stop
Automatically starts the local timer of a 6400-series telephone when a call is
received. The timer is stopped automatically when a call is ended. When a call is
placed on hold the timer continues to run, but is not displayed. When the call
comes off hold, the total elapsed call-time displays.
Long hold recall
Visual and audible warnings are sent to the telephone where a call has been on
hold past a specified period of time. Both visual and audible warnings are used if
the telephone is on-hook. If the telephone is off-hook, a “priority ring” is used.
This is an optional feature at the system level.
Manual originating line service
Connects single-line telephone users to the attendant automatically when the user
lifts the handset. The attendant number is stored in an abbreviated dialing list.
When the telephone user lifts the handset, the system automatically routes the call
to the attendant using the hot line service feature.