Instruction manual

Information and reports
Issue 4 May 2003 193555-233-767
■ Call coverage reports
The call coverage report displays measurements of the distribution of
traffic offered to call-coverage groups. Separate reports for all calls and
external calls are supplied.
■ Coverage points report
The coverage points report differs based on whether all calls or external
calls is selected. For each coverage point in the group, the number of calls
offered, abandoned while at that coverage point, and overflowing to the
next coverage point are listed.
■ Display ARP reports
■ Emergency and journal reports
The emergency and journal report is based on information from all crisis
alerts.
■ Hunt group measurements report
■ IP reports
■ Packet error history report
Provides a 24-hour history of important packet level statistics that
indirectly indicate some LAN performance characteristics. The 24-hour
history gives the ability to look back at these measures if the trouble
cleared.
■ Port network and link usage report
■ Processor occupancy report
The processor occupancy report provides summary information on how
heavily the processor is loaded.
■ Recent change history report
Allows the system manager to view or print a history report of the most
recent administration and maintenance changes on the switch. This report
may be used for diagnostic or information purposes.
■ Refresh route reports
■ Summary report
The summary report provides a performance summary of your system
running Communication Manager.
■ Tandem traffic report
The tandem traffic report provides information on facilities that serve
tandem traffic.