Instruction manual

Wireless
Issue 4 May 2003 121555-233-767
The single network connection between the PC and Communication Manager
carries two channels, one for the signaling path and one for the voice path. On
Communication Manager, the road-warrior application requires the C-LAN
circuit pack for signaling and the IP media processor for voice processing.
IP endpoint — telecommuter mode
IP endpoint — telecommuter mode enables telecommuters to use the full
Communication Manager feature set from home. It consists of a PC and a
telephone with separate connections to Communication Manager. The PC
provides the signaling path and the user interface for call control. A standard
telephone provides a high-quality voice path. The telecommuter application
requires the C-LAN circuit pack for signaling. The telecommuter application does
not use the IP media processor.
Wireless
Communication Manager supports wireless devices. For specific information, see
‘‘Mobility’’ on page 113.
3410 wireless telephone
See ‘‘3410 wireless telephone’’ on page 114.
3606 wireless VoIP telephone
See ‘‘3606 wireless VoIP telephone’’ on page 115.
Port network and gateway connectivity
Asynchronous Transfer Mode (ATM)
The Asynchronous Transfer Mode (ATM) switch is a replacement option for the
CSS or the direct-connect switch. Several Avaya ATM switch types can provide
Communication Manager port network connectivity. Non-Avaya ATM switches
that comply with the ATM standards set by the European Union can also provide
Communication Manager port network connectivity.
ATM WAN Spare Processor (WSP) Manager
See ‘‘ATM WAN Spare Processor (WSP) Manager’’ on page 198.