Instruction manual

Localization
555-233-767100 Issue 4 May 2003
Multi-Frequency Packet (MFP) signaling
Multi-Frequency Packet (MFP) address signaling is provided in Russia on
outgoing CO trunks. Calling party number and dialed number information is sent
on outgoing links between local and toll switches. Russian MFP is set on each
trunk group on the ‘type’ field on the trunk screen.
NOTE:
Russian MFP does not apply to PCOL trunks.
E&M signaling — continuous and
pulsed
Continuous and pulsed E&M signaling is a modification to the E&M signaling
used in the United States. Continuous E&M signaling is intended for use in Brazil,
but can also be used in Hungary. Pulsed E&M signaling is intended for use in
Brazil.
Public network call priority
Provides call retention, forced disconnect, intrusion, mode-of-release control, and
re-ring to switches on public networks. Different countries frequently refer to
these capabilities by different names.
World class tone detection
World class tone detection enables Avaya™ Communication Manager to identify
and handle different types of call progress tones, depending on the system
administration. You can use the tone detector and identification to display on data
terminal dialing and to decide when to send digits on trunk calls through
abbreviated dialing, ARS, AAR, and data terminal dialing.