Instruction manual

FEATURE DETERMINATION
TABLE F (continued).
Features Requiring Additional Hardware and/or Software
Hardware and/or
Actual
Feature
Software
Hardware and/or
Required
Software Needed
Recorded Telephone Dic-
Telephone dictation machines and, depend -
ation Access
ing on the type of machine, one port on a
16-port Analog Line circuit pack (see Table
T for the correct circuit pack for each coun -
try) or one port on a TN763 Auxiliary Trunk
circuit pack for each machine assigned.
Remote Access
Dedicated trunks, if Remote Access is not
available via DID.
Report Scheduler and
G3r requires a system port comprising a
System Printer
TN553 Packet Data circuit pack connected
to a TN726B Data Line circuit pack. For G1,
G3i, G3r, and G3i-Global, other hardware
requirements depend on the type of inter -
face used for the system printer (dedicated
for the Report Scheduler feature). The
printer may be an AT&T 470- or 570-series
printer, which uses a serial interface, or a
compatible printer. A Personal Computer
(PC) may be connected to the system
printer port for collection of data; however, a
serial interface on the PC must be provided
for the connection. The system printer can
be connected as follows:
● Using the Data Communications Equip-
ment (DCE) jack on the back of the
Control Cabinet which provides a stan -
dard EIA-232C interface. This eliminates
the need for a data module. An appropri-
ate 50-foot cable is required.
● Using a TN754B Digital Line port and a
data module.
● Using a TN726B Data Line port and an
ADU.
Ringer Cutoff
Requires multi-app
earance voice termimals.
54