Instruction manual

FEATURE DETERMINATION
TABLE F (continued).
Features Requiring Additional Hardware and/or Software
Hardware and/or Actual
Feature
Software Hardware and/or
R equired Software Needed
Power Failure Transfer One emergency transfer panel per five or
six trunks assigned to Power Failure
Transfer, depending on which of the two
panels is used.
● 808A Panel—Serves up to five power
failure transfer terminals. Provides
automatic ground start or loop start and
“restore after busy” feature.
● PORTA SYSTEMS® Model 574-5
Panel—Serves up to five power failure
transfer terminals. Provides automatic
ground start or loop start.
Property Management Either a TN726B Data Line circuit pack with
System (PMS)
an ADU or a data module and port on a
TN754B Digital Line circuit pack. Printer
required.
Queue Status Indication
One port on any 16 port Analog Line circuit
pack (see Table T for the correct circuit
packs per country) or TN769 Analog Line
circuit pack for each auxiliary queue warning
lamp (such as a 21 C-49).
Requires ACD software.
Recorded Announcement
Announcements can be either analog or
integrated. Each analog announcement
requires announcement equipment (Cook
Electric 213300 Single Channel or Cook
Electric 213400 Multichannel) and one port
on a 16-port Analog Line circuit pack (see
Table T for the correct circuit pack for each
country). For customized recorded
announcements, a model HQD614B
Recorder/Announcer manufactured by the
Audichron Company can be used. Each
integrated announcement, accessed by a
call, requires one port on a TN750B
Announcement circuit pack. Up to 64
announcements can be recorded on the
TN750B.
53