Instruction manual

FEATURE DETERMINATION
TABLE F (continued).
Features Requiring Additional Hardware and/or Software
Hardware and/or
Actual
Feature
Software
Hardware and/or
Required
Software Needed
Call Party Number/Billing
Requires ISDN-PRI software and CallVisor
Number
ISDN Gateway software.*
Call Prompting Each Call Prompting announcement
requires a port on a TN750B Announcement
circuit pack or an external announcement
facility (analog announcements). Note that
each announcement requires a port on any
16 port Analog Line circuit pack (see Table
T for the correct circuit packs per country).
The TN744 Call Classifier circuit pack is
required to provide touch-tone receivers for
use by the feature. Up to ten TN744s may
be assigned. Each TN744 provides eight
touch-tone receivers and requires Call Vec -
toring Basic and Call Prompting software.
Call Vectoring
If music source is required (recommended),
refer to the Music-On-Hold feature for
hardware requirements.
Requires Vectoring-Basic. Vectoring—
Prompting software is optional.*
CallVisor Adjunct Switch
Requires a port on a TN556 ISDN-BRI cir -
AppIication Interface cuit pack (12 ports) and a terminating resis -
(ASAI) tor for each interface to be provided. Up to
eight interfaces are supported. A TN778
Packet Control circuit pack is required for
CallVisor ASAl applications. A TN771
Maintenance circuit pack is required in each
port network of a duplicated CallVisor ASAl
configuration.
Requires CallVisor ASAl software.*
Centralized Attendant
For G1 or G3i, TN760 Tie Trunk or TN767
Service (CAS) DS1 Interface circuit pack. For G3r, use
(Branch or Main) TN464 Universal DS1 circuit pack instead of
TN760 or TN767. For G3i-Global, use the
TN760Dv11 Tie Trunk or TN767 or TN464
DS1 circuit pack. The TN760 will also serve
all other tie trunk applications. As an alter-
native, the TN722 DS1 Tie Trunk circuit
pack can be used for the release link trunks
of the CAS network. CAS Main or Branch
software is required.
* Software is activated by enabling this feature on the System Parameters Customer Options form.
44