Instruction manual

FEATURE DETERMINATION
TABLE F (continued).
Features Requiring Additional Hardware and/or Software
Feature
Call Detail Recording
(CDR) (continued)
Call Party Number/Billing
Number
Hardware and/or
Software
Required
94A Local Storage Unit (LSU) (Digital
Communications Equipment) (G1 Only)—a
MTDM to a port on a TN754 Digital Line cir -
cuit pack or a 212A-type modem to a port
on a TN746 Analog Line circuit pack. In the
latter case, a pooled modem is also
required.
Host computer—A private line terminated at
the DEFINITY system with a Trunk Data
Module. Also, a private line modem if off-
premises (out-of-building).
A TN726 Data Line circuit pack can be used
in conjunction with an Asynchronous Data
Unit (ADU) to connect a 94A LSU,
TELESEER CDR unit, or printer.
Older equipment may not support enhance -
ments to World Class Routing (G3i-Global).
Use Call Accounting System Plus for full
functionality in such cases.
For G1, G3i, and G3r, Interface via the
CallVisor ISDN Gateway Adjunct—refer to
the Station Identification/Automatic Number
Identification requirement for hardware
requirements.
For G3i-Global, Interface via the CallVisor
ISDN Gateway Adjunct. Assign an Interface
Link (requires a TN765 Processor Interface
circuit pack) for a direct EIA-232 connection
(if not already used). Alternately, a data
module and TN754B Digital Line port can be
used. Also, TN464D Universal DS1 circuit
pack can be used. Note that the link is
administered on the System’s Processor
Channel Assignments form. The link is
used as an interface to a CaIIVisor ISDN
Gateway adjunct (3B2 Processor) in support
of CPN/BN. Requires display terminals.
Actual
Hardware and/or
Software Needed
* Software is activated by enabling this feature on the System Parameters Customer Options form.