Instruction manual

FEATURE DETERMINATION
TABLE F (continued).
Features Requiring Additional Hardware and/or Software
Hardware and/or
Actual
Feature
Software
Hardware and/or
Raquired
Software Needed
Agent Call Handling ACD software.
Attendant Direct Extension
A selector console.
Selection With Busy Lamp
Field
Audio Information
Distributed Communications System (DCS)
Exchange (AUDIX)
software if AUDIX is desired in a DCS
Interface
arrangement.*
An AUDIX machine and, for
G1 and G3, an appropriate number of ports
on a TN746 Analog circuit pack. For G3i-
Global, an appropriate number of ports on
any 16-port Analog Line circuit pack (see
Table T for the circuit packs per country).
AUDIX data link hardware is required as fol -
lows:
Systems connected to AUDIX-L PI jack on
the TN765 Processor Interface circuit pack
and an MPDM. If the PI jack is in use for
another adjunct, one port on a TN754B Digi -
tal Line, an MTDM, and an MPDM are
required for G1 or G3i. G3r requires the
TN577 Packet Gateway and an isolating
data interface (IDI).
System connected to AUDIX-S or AUDIX-
M PI jack on the TN765 Processor Interface
circuit pack. If the PI jack is in use for
another adjunct, one port on a TN754B Digi -
tal Line circuit pack and an MPDM are
required for G1 and G3i and G3i-Global.
G3r requires the TN577 Packet Gateway
and an isolating data interface (IDI).
Authorization Codes Authorization Codes software. For outgoing
calls, ARS or AAR software.
Automatic Alternate
Private Networking software.
Routing (AAR)
Automatic Call
For G1, G3i, and G3r, one port on a TN746
Distribution (ACD)
Analog Line circuit pack per auxiliary queue
warning level lamp. For G3i-Global, one
port on any 16-port Analog Line circuit pack
(see Table T for circuit packs per country)
per auxiliary q
ueue warning level lamp.
* Software is activated by enabling this feature on the System Parameters Customer Options form.
40