Instruction manual

FEATURE DETERMINATION
Features That Require Additional Hardware and/or Software
Table F lists the features that require additional hardware and/or software. Please note that addi-
tional hardware and/or software is not required in all cases. For example, if the special “wait”
character is used extensively with the Abbreviated Dialing feature, additional tone detectors may
be needed, but if the “wait” character is not used, additional detectors may not be required. (The
“wait” character ties up the detector through the “wait” period.)
If you are planning to use a feature that requires additional hardware or software, list the
hardware and/or software in Table F.
Unless otherwise noted, the features listed in Table F are available in all versions of the system.
TABLE F. Features Requiring Additional Hardware and/or Software
Hardware and/or Actual
Feature
Software
Hardware and/or
Required
Software Needed
Abandoned Call Search
TN747 CO Trunk circuit pack.
Abbreviated Dialing
Additional TN748 tone detectors or TN420B
or C (depending on country - see Table R to
determine which tone detector to use) are
required if the special “wait” character is
used frequently. Systems can have optional
software to provide an enhanced Abbrevi -
ated Dialing list with an additional 1000
entries.
Administered
Trunk Circuits: For G1 or G3i, TN767 DS1
Connection/Access
interface, TN760 Tie Trunk, or, for G3r and
Endpoint
G3i-Global, TN464 Universal DS1 circuit
pack. For G3i-Global, TN767 DS1 Interface,
TN760Dv11 Tie Trunk or TN464D Universal
DS1 circuit pack (see Table S to determine
which circuit pack for which country).
Other circuit packs: TN726B Data Line, or
TN754B Digital Line, TN556 ISDN-BRI Line,
TN758 Pooled Modem.
Data Modules: MPDM, MTDM, 7400D
series voice terminal with DTDM, 7400B,
7500B.
* Software is activated by enabling this feature on the System Parameters Customer Options form.
39