Instruction manual

CONFIGURATION GUIDELINES
Dial Plan and Uniform Dial Plan
DS1 Circuit Pack
Hop Channel Assignments
Processor Interface Data Module
Processor Channel Assignments
Interface Links
Netcon Data Module
Routing Patterns
RNX Translation Table
Synchronization Plan
Tie Trunk Group
Hospitality Features
The following features are used to assign the Hospitality features. To implement these features,
complete the appropriate screen forms assigned to each feature.
● Automatic Wakeup
● Do Not Disturb
● Property Management System Interface
Call Rating
Check-In/Check-Out
Controlled Restriction
Housekeeping Status
Message Waiting Notification
Names Registration
Room Change/Room Swap
Step 8—End User Survey (Account Team/Client)
Establish contact with a representative from each department, section, or work group that will be
using the System. Each person selected must have the authority to make some decisions about
the new communications System. You will need to interview these contacts as you go about the
process of completing the System forms.
Identify each System user name, terminal type, and extension number to be assigned.
If required, enter each user name, terminal type, and extension number on a floor plan, or
equivalent drawing. The floor plan will help you visualize various work groups and make later
group assignments such as call answering groups or call pickup groups easier.
For all terminal types and quantities of each type identified, obtain the applicable blank station
forms and duplicate as many times as necessary.
On each duplicated station form, enter the applicable terminal type, user name, extension
number, and port number.
31