Instruction manual

CONFIGURATION GUIDELINES
When an EPN is supported, the Expansion Control Cabinet requires one circuit pack CARRIER
2A form to be completed in addition to a circuit pack CARRIER xy form for each port cabinet in
the EPN configuration. Mark EPN circuit pack forms as “EPN 1 or EPN 2,” as appropriate. Use
the circuit pack code (TN number) when assigning the circuit packs to slots.
Step 4—Required System Forms (Account Team/Client)
The remaining steps in the survey consist of instructions for completing System forms. As you
proceed, there will be times when the data for a field on a form has not yet been identified. For
those cases, note the fields requiring completion and then proceed. Later, complete the form
when the applicable data is identified.
The screen forms listed below are required in all Systems and should be completed in the order
given. For the Dial Plan, Class of Restriction, and Class of Service features, identify the fields on
the form to be completed and determine the number of forms required. Complete the fields on all
form(s) as required.
● Dial Plan
● Class of Restriction
● Class of Service
● Feature Access Codes
● Feature Related System Parameters
● System-Parameters Customer-Options (not administrable by customer)
Note: SMDR can be provided on selected trunk groups. Talk with the customer to deter-
mine the trunk groups that should be marked for SMDR. This can be done con-
currently with the next step.
Step 5—Trunk Groups (Account Team)
A complete list of all trunk groups supported by the System is provided below. Identify the asso-
ciated trunk group forms required and the fields on the form(s) to be completed, and
determine the number of forms needed. Complete the appropriate fields on all screen forms as
required.
● Access
● Advanced Private Line Termination (APLT)
● CO
● CPE
● DMI
● DID
● FX
● ISDN-PRI
● Personal Central Office Line Groups (PCOLG)
27