Instruction manual

HARDWARE AND SOFTWARE DETERMINATION
TABLE S. G3i-Global Trunk Circuit Pack Support Per Country
Analog
Analog
Country
DID CO (no PPM)
U.S.&
TN753
TN747B§
Canada
Australia
TN436B
TN2147 TN438B
TN436
Belgium
TN2146†
TN2147
Greece TN753
TN747B
Hong Kong
TN753
TN747B§
TN465
Japan TN429 TN429
TN465
Mexico
n/a TN747B§
Netherlands TN2146 TN2147
Saudi††
TN753† TN747B
Singapore
TN753†
TN747B
Taiwan
TN753 TN747B
UK TN459B TN2147
TN459
Venezuela††
TN753†
TN747B
Analog
CO w/PPM
n/a
n/a
TN465
n/a
n/a
TN465
TN2138
TN447
TN465
4W
2W Digital Trunks
Tie Tie
CO/DID Tie ISDN CO
TN760D
n/a
TN767
TN767 TN767
TN464D TN722 TN464D
TN464D
TN437B
TN439
n/a
TN464D TN464D
TN437 TN464C TN464C
TN760Dv11§§
n/a
TN464D† TN464D
TN464D
TN760D
TN464D
n/a
TN464C
TN760D
n/a
TN464D
TN464D
TN464C
TN760D
TN439
n/a
n/a n/a
TN760D TN464D
TN4640
n/a
TN464C
TN760Dv11§§ TN464D TN464D TN464D
TN760D
n/a
TN464D
n/a
TN464C
TN464B
TN760D
TN464D n/a
TN464C
TN760D
TN464D
n/a
TN464C
TN767
TN760Dv11
TN464D* TN464D TN464D**
TN464C
TN760D TN439
n/a
TN464D n/a
TN464C
*
Only DID is supported.
**
Needs a 3NET converter that converts the boards from ISDN to UK DASS-II/DPNSS.
†
MFC Service Circuit needed.
†† In Saudi and Venezuela there are existing A-law V2 systems. Upgrading will replace such systems,
including port and service circuit packs, with
µ -law hardware.
§
If polarity-reversal signaling is required for disconnect supervision, vintage 12 or later must be used.
§§ Requires an external converter, Use the Prescom® model TS-X 1276.
106