6.0 Cordless Telephone User's Manual

Caller ID
30
Caller ID history
Make a call log entry ready to dial
Although the call log entries received typically have
10 digits (the area code plus the seven-digit
number), in some areas, you might need to dial only
the seven digits, or 1 plus the seven digits, or 1 plus
the area code plus the seven digits. You can change
the number of digits that you dial from and store in
the call log.
While reviewing the call log, press # repeatedly to
show different dialing options for local and long
distance numbers before dialing or saving the
telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1 in front of the telephone
number before dialing or saving it in the directory.
When the number is shown in the correct format for dialing, press
PHONE/
FLASH or SPEAKER to call the number.
Dial a call log entry
1. When in the call log, press TCID or DIRS to browse.
2. Press PHONE/
FLASH or SPEAKER to dial the entry.
Delete entries
• Press DELETE to delete the shown entry from the caller ID history.
• Follow the steps below to delete all caller ID entries.
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Use TCID or DIRS to scroll to >CALL LOG, then press
MENU/SELECT.
3. Use TCID or DIRS to scroll to >DEL ALL CALLS, then press
MENU
/SELECT.
4. When the screen shows DELETE ALL CALLS? press
MENU/SELECT
to clear the caller ID history of all entries, or press OFF/CLEAR to
exit and leave all entries in the caller ID history intact.
994.3556
2.994.3556
999.994.3556
2.999.994.3556
994.3556
2.994.3556
999.994.3556
2.999.994.3556
Press #
Press
1