User`s guide

Result Codes
E-2 Issue 3 October 1995
Table E-1. DataPort PCX Result Codes (2 of 2)
Numbers
(ATV0)
Description
Word
(ATV1)
11 CONNECT 4800
1, 4
Connection at 4800 bps
12 CONNECT 9600
1, 4
Connection at 9600 bps
13 CONNECT 7200
1, 4
Connection at 7200 bps
14 CONNECT 12000
1, 4
Connection at 12,000 bps
15 CONNECT 14400
1, 4
Connection at 14,400 bps
16 CONNECT 19200
1
DTE connection at 19,200 bps
17 CONNECT 38400
1
DTE connection at 38,400 bps
18 CONNECT 57600
1
DTE connection at 57,600 bps
22 CONNECT 75TX/1200RX
1
V.23 Originate connection
23 CONNECT 1200TX/75RX
1
V.23 Answer connection
33 FAX Fax connection in fax mode
35 DATA Data connection in fax mode
40 CARRIER 300 V.21 or Bell 103J carrier detected
44 CARRIER 1200/75 V.23 bwd channel carrier detected
45 CARRIER 75/1200 V.23 fwd channel carrier detected
46 CARRIER 1200 V.22 or Bell 212A carrier detected
47 CARRIER 2400 V.22bis carrier detected
48 CARRIER 4800 V.32 or V.32bis carrier detected
49 CARRIER 7200 V.32bis carrier detected
50 CARRIER 9600 V.32 or V.32bis carrier detected
51 CARRIER 12000 V.32bis carrier detected
52 CARRIER 14400 V.32bis carrier detected
66 COMPRESSION:CLASS5 MNP5 compression enabled
67 COMPRESSION:V.42 BIS V.42bis compression enabled
69 COMPRESSION:NONE No data compression enabled
76 PROTOCOL:NONE Standard asynchronous mode
+F4 +FCERROR V.21 signal received when high
speed fax expected
1
For ATX0, result code 1 or CONNECT is displayed instead.
4
Refers to DTE rate or DCE rate depending on setting of ATW n .