User`s guide

Communications and Fax Software Settings
C-3
Issue 3 October 1995
Table C-1. Software Configuration Guidelines
Configuration
Option
Setting (If Available) Likely Uses
Autobaud Off or Disable
Baud Rate (DTE Rate) Maximum computer
can handle; if in doubt,
use 19,200 bps
COM/IRQ As identified by
COMTEST
Data Bits/Parity/Stop
Bits
8-N-1, or as
recommended by the
remote system owner
BBSs and online
services, including
AT&T Paradyne BBS
Hardware Flow
Control (RTS/CTS)
ON or Enable
Lock Speed ON or Enable
Modem Type / Driver DataPort PCX or
generic (Hayes-
compatible) Class 1
Fax Modem
Software Flow Control
(Xon/Xoff)
Off or Disable
Terminal Emulation VT100
ANSI
Mainframe connections
AT&T Paradyne BBS
Table C-2. Modem Configuration Guidelines
Configuration
Option
Setting
AT
Command
DTR Action RS-232 &D2 (Default)
Hardware Flow Control
(RTS/CTS Flow Control)
RTS (Modem)/
CTS (DTE)
&K3 (Default)
Line Rate (VF Rate) Maximum Possible F0 (Default)
LSD Control RS-232 &C1 (Default)
Result Codes Enable all V1, W0, X4 (Defaults)
RPI Enable +H11