User Manual

Directory
34
Speed dial
The telephone system has 9 speed dial locations (2-9, 0) and a
voicemail access location 1 where you can store the telephone
numbers you wish to dial more quickly. You can store up to 30 digits
in each location. Speed dial assignments can only be selected from
the existing directory entries. The voicemail access number must be
manually entered. In the directory, speed dial locations are indicated
by their number on the bottom left side of the screen.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press MENU/SELECT to select >Directory.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial
location, or press the dialing key corresponding to the
location you wish to assign (2-9, 0), then press MENU/SELECT.
The screen briefly shows Copy from Directory... and then
enters your directory list.
5. Press qCID or pDIR to scroll to the phone number you wish
to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Reassign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press MENU/SELECT to select >Directory.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose the location you wish to reassign,
or press the dialing key corresponding to the location you
wish to reassign (2-9, 0), then press MENU/SELECT.
5. Press MENU/SELECT again.
6. Scroll to >Change SD and then press MENU/SELECT. The screen
briefly shows Copy from Directory..., then enters your directory list.
7. Press qCID or pDIR to scroll to the phone number you wish
to reassign to the selected speed dial location.
8. Press MENU/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Add contact
>Speed dial
>2:Robert Brown
3:<Unassigned>
Copy from
Directory...
Robert Brown
888-883-2445
2
Robert Brown
888-883-2445
2
Speed dial location