Tl7610 Dect 6 Cordless Headset Manual

18
Getting started
Adding and registering a headset
The TL7610 accommodates up to two cordless headsets. You
can add a new headset (TL7600, purchased separately) to the
headset base at any time. You must register each new headset
with the headset base before use (see page 19).
-OR-
You can register a maximum of two TL7610 headsets to
an AT&T DECT 6.0 cordless telephone. The telephone base
recognizes and counts a headset the same as a handset.
When you register the TL7610 to an AT&T DECT 6.0 cordless
telephone, the headset base acts only as a charger for the
headset. The LIFTER AUDIO ADJUST, VOLUME / and
MODE controls on the headset base become inactive. You can
place the headset base anywhere you have an available power
outlet. Do not plug in the telephone line cord; you only need
to plug the headset base into a power outlet (see page 20).
Refer to your telephone user's manual for the maximum
number of handsets that you can register to the telephone
base. If you have the maximum number of handsets registered,
you need to follow the deregistration information in your
user's manual.
Visit www.telephones.att.com/headsets for a list of
compatible cordless telephones.
You can only register the headset to one product at a time, so
the headset must be deregistered before registering to a headset
base or a cordless telephone (see page 21).
The first headset provided with your TL7610 has a blue ON/OFF
light. When you register a second headset, the ON/OFF light of
that headset turns orange to help you identify the headsets.
•
•