Specifications

Re-initializing a Password
If a subscriber forgets the password for his or her mailbox, you can re-initialize
the password to the factory setting of 1234 so the user can retrieve messages.
Remind the subscriber to change the password immediately after logging in for
the first time.
To re-initialize a password to 1234:
1.
2.
3.
4.
5.
Access the Programming Main Menu:
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button.
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press [#]
.
d. Press [9]
.
The system plays the system programming options.
Press [4]
to program mailboxes. The system tells you how many mailboxes
exist and how many are allowed, then:
Please enter the mailbox number followed by # or press
# for the next mailbox.
Enter the number of the mailbox whose password you want to re-initialize
followed by [#]
. The system plays:
Mailbox XX exists. To re-initialize the password,
press 3.
To re-initialize the mailbox, press 4. To
program the Mailbox Language, press 6.
To delete the
mailbox, press * D.
If finished with this mailbox,
press * #, or press # for the next mailbox.
Press [#] , The system plays:
The password has been re-initialized.
Press [∗] [7] to return to the Programming Main Menu or hang up to quit.
Re-initializing a Mailbox
To prepare a previously used mailbox for a new subscriber, you can re-initialize
the mailbox. This procedure deletes any messages left in the mailbox, turns off
the phone’s message light (if lit), erases the personal greeting (if recorded),
changes the password back to the factory setting (1234), and changes the
Mailbox Language back to either the System Language (Monolingual Mode) or
the Primary Language (Bilingual Mode).
To re-initialize a mailbox:
1. Access the Programming Main Menu:
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button.
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press [#]
.
d. Press [9]
.
The system plays the system programming options.
System Management
5-35