Specifications

Modifying the Secondary Language
Update Form 1 for the voice messaging system to show the change in the
Secondary Language selected for Bilingual Mode.
When you change the Secondary Language, the system uses any recorded
messages already associated with the new Secondary Language. After
changing the Secondary Language, listen to the Automated Attendant Service
Day and Night Menu Prompts to make sure they are still relevant; rerecord them
if necessary.
To change the Secondary Language:
1.
2.
3.
4.
5.
6.
7.
8.
Access the Programming Main Menu:
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button.
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press [#]
.
d. Press [9]
.
The system plays the system programming options.
Press [1]
for Language. The system plays:
To program Language Mode, press 1.
To program System
Language, press 2.
If finished, press * #.
Press [2] for System Language. The system plays:
To program Primary Language, press 1.
To program
Secondary Language, press 2.
If finished, press * #.
Press [2] for Secondary Language. The system plays:
To play Secondary Language, press 2.
To modify
Secondary Language, press 6.
If finished, press * #.
Press [6] . The system plays the current Secondary Language, then prompts
you to enter the number corresponding to the desired language.
Press the number for the language you want to use. The system plays:
For LANGUAGE (where LANGUAGE is the current language) ,
press 9 to confirm or 6 to cancel.
Either:
■
Press [6] to cancel your selection. The system plays:
Secondary Language has not been changed.
■
Press [9] to confirm your selection. The system plays:
Secondary Language has been changed.
Press [∗] [7] to return to the Programming Main Menu or hang up to quit.
System Management
5-13