Specifications

Modifying the System Language
Update Form 1 for the voice messaging system to show the change in the
System Language selected for Monolingual Mode.
When you change the System Language, the system uses any recorded
messages already associated with the new System Language. After changing
the System Language, listen to the Automated Attendant Service Day and Night
Menu Prompts to make sure they are still relevant rerecord them if necessary.
NOTE:
When you change the System Language, the Mailbox Language for any
mailboxes that were left at the factory setting also change to reflect the new
System Language. Any mailboxes that were assigned a different language do
not change.
To change the System Language:
1.
2.
3.
4.
5.
6.
7.
Access the Programming Main Menu:
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button.
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press [#]
.
d. Press [9]
.
The system plays the system programming options.
Press [1]
for Language, The system plays:
To program Language Mode, press 1.
To program System
Language, press 2.
If finished, press * #.
Press [2] for System Language. The system plays:
To play System Language, press 2.
To modify System
Language, press 6.
If finished press * #.
Press [6] . The system plays the current System Language, then prompts you
to enter the number corresponding to the desired language.
Press the number for the language you want to use. The system plays:
For LANGUAGE (where LANGUAGE is the current language),
press 9 to confirm or 6 to cancel.
Either:
■ Press [6] to cancel your selection. The system plays:
System Language has not been changed.
■ Press [9] to confirm your selection. The system plays:
System Language has been changed.
Press [∗] [7] to return to the Programming Main Menu or hang up to quit.
System Management
5-9