Specifications

PARTNER MAIL VS™ System Programming Quick Reference
Centralized Telephone Programming Quick Refernce
Place the Programming Overlay on the dial pad of the system display phone at extension 10*
TO START CENTRALIZED
TO PROGRAM ANOTHER FEATURE
TO ERASE A FEATURE OR AUTO
TELEPHONE PROGRAMMING
AT THE SAME EXTENSION
DIAL BUTTON
PRESS [ Feature ] [0] [0]
After you program one feature, continue
PRESS the programmed button
PRESS [ System Program ] [ System Program ]
with the instructions in the box for the
PRESS [ Mic ]
next feature
PRESS [ Central Tel Program ]
TO CHANGE SETTlNG FOR
TO END CENTRALIZED
DIAL the extension number to be
ANOTHER EXTENSION
TELEPHONE PROGRAMMING
programmed
PRESS [ Central Tel Program ]
PRESS [ Feature ] [0] [0]
Buttons on which lines are assigned for the
extension light up to show the current Line
Ringing setting; remaining buttons can be
DIAL the new extension’s number
programmed with Auto Dial numbers or
features
VMS COVER
PRESS a programmable button with
lights
PRESS [ Feature ] [1] [5]
†
C11
VOICE MAILBOX TRANSFER
PRESS a programmable button
PRESS [ Feature ] [1] [4]
††
C13
VOICE MAIL MESSAGES
AUTO DIAL BUTTON
PRESS a programmable button
PRESS Left [ Intercom ]
DIAL [7] [7] [7]
C14
DO NOT DISTURB
PRESS a programmable button with
lights
PRESS [ Feature ] [0] [1]
C12
= Button with Lights Required
*
Some systems also allow programming from extension 11. Check the Programming and Use guide for the communications system.
† In some countries, the procedure code for VMS Cover is [ Feature ] [1] [6] . Check the Programming and Use guide for the
communications system.
†† In some countries, the procedure code for Voice Mailbox Transfer is [ Feature ] [1] [5] . Check the Programming and Use guide
for the communications system.
4-30 Initial Programming