Specifications

Refer to CS Form A, Page 1 of 2,
Yes Use Group Call Distribution (#206)*
Line Coverage to see if any lines are
to program the personal lines
checked off in the VMS-Mail column.
as VMS Line Coverage for Hunt
Group 7.
C3
Refer to VMS Form 6, Columns A
and D to assign Line Ownership
to specified lines.
V17
No
Refer to CS Form A, Page 1 of 2,
Line Coverage to see if any
extension numbers are specified in
the VMS-Mail column.
Yes
Use Line Coverage Extension (#208)
to program line ownership for those
extensions.
C4
No
Refer to CS Form B2 to determine if
Yes
Assign Automatic VMS Cover
Automatic VMS Cover (#310) is (#310) to those extensions.
assigned for any extensions.
C7
!
No
Refer to CS Form A, Page 2 of 2, to
Yes
Use VMS Cover Rings (#117) to
see if a different number of VMS
Cover Rings (#117) † is specified.
program the number of rings.
C8
No
Refer to CS Form C to determine if a
VMS Cover button is specified for any
extensions.
Yes Program a VMS Cover button
on the system phone at those
extensions.
C11
No
Refer to CS Form C to determine if a
Yes Program a Do Not Disturb button
Do No Disturb button is specified for
on the system phone at each of
any extensions.
those extensions.
I
C12
No
Refer to CS Form C to determine if
Yes
Program a Voice Mailbox Transfer
a Voice Mailbox Transfer button is
button on the system phone at
specified for any extensions.
those extensions.
C13
No
Program a Voice Mail Messages
button on all subscribers’ system
phones for one-touch access to
the voice messaging system.
C14
Test the system (p. 4-20).
*
In some countries, the procedure code for Group Call Distribution is #205. Check the Programming and Use guide for the communications system.
† VMS Cover Rings (#117) may not be available on your system. Check the Programming and Use guide for the communications system.
4-26 Initial Programming