Specifications

Initial Proramming Flowchart
Refer to CS Form B1 to identify the
extensions for the PARTNER MAIL
V1
Use Hunt Group Extensions (#505)
to assign the PARTNER MAIL VS
extensions to Hunt Group 7.
C1
V3
Use Transfer Return Extension
(#306)* to specify extension 10 as
the transfer return extension for
each of the PARTNER MAIL VS
extensions.
C2
Refer to VMS Form 1 to see if the
system should be programmed for
Bilingual Mode.
No
Refer to VMS Form 1 to see if a
different System Language is
specified. If so, modify the System
Language.
V2
V3
Key:
• CS -
Refers to the System
Planner forms for the
Communications System.
• VMS – Refers to the forms for the
Voice Messaging System.
• C# -
Refers to a quick reference
programming procedure for
the Communications
System.
• V# -
Refers to a quick reference
programming procedure for
the Voice Messaging
System.
Note: C#N# procedures follow this
flowchart.
Yes
Modify the Language Mode.
Refer to VMS Form 1 to see if a
different Primary Language is
specified. If so, modify the Primary
Refer to VMS Form 1 to see if a
different Secondary Language is
specified. If so, modify the
Secondary Language.
*
In some countries, the procedure code for Transfer Return Extension is #309. Check the Programming and Use guide
for the communications system.
Initial Programming 4-23