Specifications
Line Coverage
Refer to Form A, Page 1 of 2, Line Coverage, VMS-Mail:
■
If check marks appear for any lines in this column, use the procedure in
“VMS Line Coverage” below.
■
If extension numbers are specified for any lines in this column, use the
procedure in “Line Coverage Extension” below.
VMS Line Coverage
To assign VMSMail lines checked on Form A, Page 1 of 2, Line Coverage, to
Hunt Group 7:
1.
Press [#] [2] [0] [6] * .
2.
At the
Group:
prompt, press [7] .
3.
At the Line: prompt, enter the first line checked in the VMS-Mail column,
4.
Press [ Next Data ] until the display reads
3
VMS
Line Cover.
5.
To program another line, press [ Next Item ] or [ Prev Item ] until the appropriate line
number displays.
6.
Press [ Next Data ] until the display reads
3 VMS Line Cover.
7.
Repeat Steps 5 and 6 for each VMS-Mail line checked on Form A.
8.
Continue with the next section, “Automatic VMS Cover.”
Line Coverage Extension
To assign line coverage for the extension numbers specified in the VMS-Mail
column on Form A, Page 1 of 2, Line Coverage:
1.
Press [#] [2] [0] [8]
†
.
2.
At the Line: prompt, enter the first line for which an extension is specified in
the VMS-Mail column of Form A, Page 1 of 2, Line Coverage.
3.
At the Data: prompt, enter the number of the extension specified in the
VMS-Mail column,
4.
To program another line, press [ Next Item ] or [ Prev Item ] until the appropriate line
number displays.
5.
At the Data: prompt, enter the number of the extension specified in the
VMS-Mail column.
6.
Repeat Steps 4 and 5 for each VMS-Mail line for which an extension number is
written on Form A.
7.
Continue with the next section, “Automatic VMS Cover.”
*
In some countries, the procedure code for Group Call Distribution is #205, Check the Programming and Use
guide for the communications system.
†
Extension Line Coverage (#208) is not available on all systems. Check the Programming and Use guide for
the communications system.
4-16 Initial Programming