Specifications

Night Service
Check Form C for extension 10. If a Night Service button is specified, follow the
procedure below,
To program Night Service on a button with lights at extension 10 as specified on
Form C:
2.
At this point, do one of the following:
■
If you want to assign Night Service to the first available button on the
system phone, press [ Next Data ] until the display reads:
Night Service
1 Assigned-Ext 10
Go to Step 3.
■
If you want to assign Night Service to a specific button*, press [3] .
The display reads:
Night Service
3 Select Button
Press the desired programmable button with lights to assign Night Service
to that button.
3.
Label the Night Service button at extension 10.
5. Continue with “Music on Hold” below.
Music on Hold
If desired, program Music on Hold. See the Programming and Use guide for the
communications system for instructions.
Continue with the next section, “Call Answer Service.”
Call Answer Service
Before you begin, locate Forms A and B2 of the System Planner for the
communications system.
■
Refer to Form A, Page 1 of 2, Line Coverage, If either check marks or
extension numbers appear in the VMS-Mail column, use “Line Coverage”
on the next page to program personal lines for Call Answer Service.
■
If nothing is specified in the VMS-Mail column of Form A, refer to Form B2
to see if Automatic VMS Cover is assigned to any extensions. If it is, refer
to “Automatic VMS Cover” and “VMS Cover Rings” on page 4-17.
■ If neither VMS-Mail for personal lines or Automatic VMS Cover is
specified, skip to “Telephone Button Programming.
”
*
Select button (option 3) is not available on all systems. Check the Programming and Use guide for the
communications system.
Initial Programming 4-15