Specifications

Monolingual Mode
To change the System Language as specified on Form 1:
1.
2.
3.
4.
5.
6.
7.
8.
If necessary, access the Programming Main Menu. If you are already at the
Programming Main Menu, skip to Step 2.
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button,
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press [#]
.
d. Press [9]
.
Press [1]
for Language.
Press [2]
for System Language.
Press [6]
to modify System Language.
Enter the number corresponding to the System Language specified on Form 1.
Press [9]
to confirm your selection.
Press [∗]
[7] to return to the Programming Main Menu.
Continue with the next section, “Automated Attendant Service.”
Bilingual Mode
To change the Language Mode and the Primary and Secondary Languages as
specified on Form 1:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
If necessary, access the Programming Main Menu. If you are already at the
Programming Main Menu, skip to Step 2.
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button.
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press [#]
.
d. Press [9]
.
Press [1]
for Language.
Press [1]
for Language Mode.
Press [2]
for Bilingual Mode.
Press [2]
for System Language.
Press [1]
for Primary Language or [2] for Secondary Language.
Press [6]
to modify the language.
Enter the number corresponding to the language specified on Form 1.
Press [9]
to confirm your selection.
To modify the other language, press [∗]
[#] and repeat Steps 6 through 9.
Otherwise, skip this step.
Press [∗]
[7] to return to the Programming Main Menu.
Continue with the next section, “Automated Attendant Service.”
4-4 Initial Programming