Specifications

Transfer Return Extensions
For extensions that do not have voice mail coverage, this procedure ensures
that unanswered calls transferred by the voice messaging system transfer return
to the receptionist’s extension where they will ring until they are answered.
To assign extension 10 as the transfer return extension for the PARTNER MAIL
VS extensions specified on Form B 1:
1.
Press [#] [3] [0] [6] * .
2.
At the Extension: prompt, enter the first PARTNER MAIL VS extension
number specified on Form B 1,
3.
At the Data: prompt, press [1] [0] .
4. Press [ Next Item ] or [ Prev Item ] until the next PARTNER MAIL VS extension number
specified on Form B1 displays.
5.
At the Data: prompt, press [1] [0] .
6.
If additional PARTNER MAIL VS extensions are specified on Form B1, repeat
Steps 4 and 5 for each one.
7.
Press [ Feature ] [0] [0] to exit programming.
8.
Refer to the next section for information about programming the voice
messaging system.
Voice Messaging System Programming
Language
Before you begin, locate Form 1 for the voice messaging system. Check to see
if any of the Language settings are changed from the factory defaults:
■
■
If none of the Language settings are changed, skip to “Automated
Attendant Service.”
If any of the Language settings are changed, follow the appropriate
procedure for either Monolingual Mode or Bilingual Mode.
*
In some countries, the procedure code for Transfer Return Extension is #309. Check the Programming and
Use guide for the communications system.
Initial Programming 4-3