Specifications

Using System Programming
A special login number is required to program the voice messaging system.
The following information applies to this login
■
■
■
■
The login number is 99.
99 is not an extension number.
The language associated with this login is either the System Language
chosen for Monolingual Mode or the Primary Language chosen for
Bilingual Mode; it cannot be changed.
This login’s factory-set Mailbox Password is 1234. If you are the System
Manager, refer to “Changing Your Mailbox Password” in Chapter 5 to
change the password before you begin to program the system.
NOTE:
Although this login has a Mailbox Password, it does not have an associated
mailbox.
To begin programming the voice messaging system, you make a call to the
Voice Mail Service, enter the login and password, and select option 9 (you are
not prompted for this option). This takes you to the Programming Main Menu
(shown in Figure 3-1).
The Programming Main Menu
The Programming Main Menu allows you to access the Language Mode and the
language(s) associated with that mode, the Automated Attendant Service Menu,
mailbox assignments, and line ownership assignments.
Figure 3-1. Programming Menus
Understanding Programming 3-5