Specifications

Install the voice messaging system module in the first available slot to the right

of the last installed 206 or 400 module. Do not install the voice messaging

system module in the first slot of the PARTNER Plus system control unit or

the PARTNER

or PARTNER 48 system primary carrier.

NOTE:

The voice messaging system module should always be installed after the

206 and 400 modules to ensure consecutive extension numbering. If the

control unit is upgraded with more 206 or 400 modules, the voice

messaging system module should be removed, the new modules should

be installed, and the voice messaging system module should be replaced

in the first available slot after the 206 and 400 modules, The VMS Hunt

Group Extensions and Transfer Return Extensions should be

reprogrammed (see page 4-2 and 4-3).

Push slowly but firmly in the center of the module until the module locks

into place, and is attached to the rear of the backplane. Do not force the

module. If it does not insert easily, remove the module, clear any

obstruction, and reinsert it.

Refer to Figure 2-1, then record the extensions associated with the PARTNER

MAIL VS module on Form B1 of the System Planner for the

communications system.

Figure 2-1. Voice Messaging System Extensions

2-2 Installation