Specifications

PARTNER MAIL VS™ System Programming Quick Reference
Centralized Telephone Programming Quick Reference
Place the Programming Overlay on the dial pad of the system display phone at extension 10’
TO START CENTRALIZED
TELEPHONE PROGRAMMING
PRESS [ Feature ] [0] [0]
PRESS [ System Program ] [ System Program ]
PRESS [ Central Tel Program ]
DIAL the extension number to be
programmed
Buttons on which lines are assigned for the
extension light up to show the current Line
Ringing setting; remaining buttons can be
programmed with Auto Dial numbers or
features
TO PROGRAM ANOTHER FEATURE
AT THE SAME EXTENSION
After you program one feature, continue
with the instructions in the box for the
next feature
TO CHANGE SETTlNG FOR
ANOTHER EXTENSION
PRESS [ Central Tel Program ]
DIAL the new extension’s number
TO ERASE A FEATURE OR AUTO
DIAL BUTTON
PRESS the programmed button
PRESS [ Mic ]
TO END CENTRALIZED
TELEPHONE PROGRAMMING
PRESS [ Feature ] [0] [0]
VMS COVER
VOICE MAILBOX TRANSFER
VOICE MAIL MESSAGES
PRESS a programmable button with
PRESS a programmable button
AUTO DIAL BUTTON
lights
-
PRESS [ Feature ] [1] [4]
††
PRESS [ Feature ] [1] [5]
†
DO NOT DISTURB
PRESS a programmable button with
lights
PRESS [ Feature ] [0] [1]
PRESS a programmable button
PRESS left
[ Intercom ]
DIAL [7] [7] [7]
= Button with Lights Required
* Some systems also allow programming from extension 11. Check the Programming and Use guide for the communications system.
† In some countries, the procedure code for VMS Cover is [ Feature ]
[1] [6] . Check the Programming and Use guide for the
communications system.
†† In some countries, the procedure code for Voice Mailbox Transfer is [ Feature]
[1] [5] . Check the Programming and Use guide
for the communications system.