Specifications
Language
Cannot Switch Between Primary and
Secondary Languages
Possible Cause: The system is set for Monolingual Mode.
What to do: Refer to “Modifying the Language Mode” in Chapter 5 to determine the
system’s Language Mode.
Cannot Understand Language Prompts
Possible Cause: Either a language you do not understand was inadvertently chosen while
programming, or you do not understand the factory-set language.
What to do: To change the language to one you understand, do one of the following:
■ If the system is set for Monolingual Mode:
1.
Press [ Intercom ] [7] [7] [7].
2.
Press [9] [9] [#] .
3.
Enter the System Manager’s Mailbox Password.
4.
Press [9] [1] [2] [6] .
5.
Press the number corresponding to the desired language.
6.
Press [9]
.
■ If the system is set for Bilingual Mode:
1.
Press [ Intercom ] [7] [7] [7] .
2.
Press [9] [9] [#] .
3.
Enter the System Manager’s Mailbox Password.
4.
Press [9] [1] [2] [1] [6] .
5.
Press the number corresponding to the desired language.
6.
Press [9]
.
6-8 Troubleshooting