Specifications

Scanning Line Ownership
To review the current owners of outside lines:
1.
2.
3.
4.
5.
6.
Access the Programming Main Menu:
a. Press [ Intercom ] [7] [7] [7] or the programmed VMMsgs button.
b. Press [9] [9] [#] .
c. Enter the Mailbox Password and press
[#] .
d. Press [9] .
The system plays the system programming options.
Press [6] for line ownership. The system plays:
To scan line ownership, press 2; to assign line
ownership, press 4; to modify line ownership, press 6.
To delete line ownership, press * D.
Press [2] . The system plays:
Please enter the CO line number followed by #, or press
# for the next line owner.
Enter a specific outside Iine number followed by [#] , or press [#] for the first
outside line number that has been assigned an owner.
The system responds as follows:
■ If you entered a line number followed by [#] , the system tells you
whether or not an owner is assigned.
■ If you entered [#] , the system tells you the mailbox number of the owner
of the first outside line that has an owner.
Press
[#] to hear the mailbox number for the next outside line that has an
owner.
Press
[*] [7] to return to the Programming Main Menu or hang up to quit.
System Management
5-41