Specifications

VMS Cover
To give a subscriber the ability to turn voice mail coverage on and off, you can
program a VMS Cover button on the subscriber’s system phone.
To program a VMS Cover button:
1.
2.
3.
4.
5.
6.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Proram ].
Enter the number of the extension to be programmed.
Press a programmable button with lights.
Press [ Feature ] [ 1 ] [ 5 ].
Program another button for this extension or press [ Feature ] [ 0 ] [ 0 ] to exit
programming mode.
Label the button at the user’s extension.
Do Not Disturb
Used in conjunction with either automatic or manual extension coverage, this
button lets subscribers send callers immediately to their voice mailbox.
To program a Do Not Disturb button:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
Enter the number of the extension to be programmed.
3.
Press a programmable button with lights.
4. Press [ Feature ] [ 0 ] [ 1 ].
5. Program another button for this extension or press [ Feature ] [ 0 ] [ 0 ] to exit
programming mode.
6.
Label the button at the user’s extension.
System Management
5-27