Specifications

Modifying Line Ownership
Update Form 5 of the Planning Guide for the voice messaging system to show
modifications to line ownership; then use the updated form while performing the
following procedure.
To change line ownership:
1. Access the Programming Main Menu:
a.
Press [ Intercom ] [ 7 ] [ 7 ] [ 7 ] or a programmed button.
b.
Press [ 9 ] [ 9 ] [ # ].
c.
Enter your password and press [ # ].
d.
Press [ 9 ].
The system plays the system programming options.
2. Press [ 6 ] for line ownership. The system plays:
To scan line ownership, press 2; to assign line
ownership, press 4; to modify line ownership, press 6.
To delete line ownership, press star D.
3.
Press [ 6 ]. The system plays:
Please enter the CO line number followed by the pound
sign. If finished, press star pound.
4. Enter the number of the outside line whose ownership you want to modify
followed by [ # ].
If the line does not have an owner, the system tells you so. Otherwise, the
system plays:
CO line X owner is mailbox YY. Enter the mailbox
number of the new line owner followed by the pound
sign. If finished, press star pound.
5.
Enter the new mailbox number followed by [ # ]. The system plays:
CO Line X owner is mailbox YY.
If the mailbox does not exist, you are told so. See “Creating a Mailbox”
earlier in this chapter for instructions on creating mailboxes.
6.
Repeat Steps 4 and 5 to modify line ownership for any other lines.
7.
Press [ ✳ ] [ R ] to return to the Programming Main Menu or hang up to quit.
5-24 System Management